BETTA Fluid Control Co., Ltd.

BETTA knife gate valve with non-rising stem and handwheel for wastewater treatment 0C to 80℃

KGV49X1-10Q: Connection; Flanged; Material; Ductile Iron; DN; DN50~300; PN; PN10; Closing Direction; Clockwise to Close

Test/Approvals:

Hydraulic test according to EN12266

Face to face according to DIN/EN 558-1, series 20(K1)
Standard flange drilling to EN1092-2(ISO 7005-2), PN10

Replaceable top packing gland enables sealing replacement without disassembly of the valve
The valve is self-cleaning when opening the valve, an additional scraper is available for extra protection of the packing gland
Bi-directional, can be installed independent of the flow direction
Full bore with no reduction of the flow
Plain bottom prevents sediment from being accumulated
U-shaped one-piece NBR sealing between the body parts makes up for tolerances in coating and casting, it is reinforced with a steel insert to protect it from being damaged during operation
Supports integrated in the body casting protect the gate from deflecting under pressure
Gate, stem, bolts and nuts of acid-resistant stainless steel
Body of ductile iron for high strength and impact resistance, optionally of stainless steel or duplex
Approved according to the 97/23/CE European Pressure Equipment Directive
Slim design and low weight
Available with lever, non-rising stem and handwheel, rising stem and handwheel, pneumatic actuator, ISO top flange for actuator or complete with electric actuator
Available in larger sizes